OBDHut

OBDHut

P3476

Moderate

Cylinder 10 Deactivation/Intake Valve Control Circuit High

What Does P3476 Mean?

The PCM has detected a high voltage condition in cylinder 10's intake valve deactivation control circuit. This typically indicates an open circuit or short to voltage preventing proper valve control.

Common Causes

35%

Open circuit within cylinder 10 deactivation solenoid winding

Deactivation solenoid
Solenoid coil

25%

Wiring harness break or disconnection in control circuit

Wiring harness
Wire terminals

20%

Short to voltage in wiring harness

Wiring harness
Wire insulation

12%

Disconnected or damaged electrical connector at solenoid

Electrical connector
Connector terminals

8%

Failed PCM unable to control circuit properly

Powertrain control module

Diagnostic Steps

1

Step 1: Inspect electrical connector at cylinder 10 intake valve deactivation solenoid for proper connection and terminal damage

2

Step 2: Disconnect solenoid connector and measure resistance across solenoid terminals; infinite resistance indicates open circuit

3

Step 3: Check for continuity from PCM connector to solenoid connector throughout entire circuit

4

Step 4: Test for unwanted voltage in circuit by checking for voltage at PCM side with solenoid disconnected

5

Step 5: If wiring and solenoid test normal, verify PCM ground circuits and test PCM output with bi-directional controls

Estimated Repair Cost

$150 - $900

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P3476 mean?

The PCM has detected a high voltage condition in cylinder 10's intake valve deactivation control circuit. This typically indicates an open circuit or short to voltage preventing proper valve control.

What causes P3476?

The most common cause of P3476 (Cylinder 10 Deactivation/Intake Valve Control Circuit High) is: Open circuit within cylinder 10 deactivation solenoid winding

How much does it cost to fix P3476?

Typical repair costs for P3476 range from $150 to $900, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P3476?

Safe to operate vehicle. Fuel economy will be negatively impacted as cylinder deactivation feature will be disabled.

How do I diagnose P3476?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P3476 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.