OBDHut

OBDHut

U0122

Critical
Professional

Lost Communication With Vehicle Dynamics Control Module

What Does U0122 Mean?

Communication has been lost between the vehicle's main control module and the Vehicle Dynamics Control Module. This module manages electronic stability control, traction control, and advanced handling systems.

Safety Warning

Electronic stability control and traction control systems will be disabled. Vehicle handling will be unpredictable in emergency situations, wet roads, or adverse conditions, significantly increasing rollover and loss-of-control risk.

Common Causes

35%

Failed Vehicle Dynamics Control Module with internal circuit or software malfunction

Vehicle Dynamics Control Module
Stability Control Module
VDC Module

30%

CAN bus network wiring damage, open circuits, or short circuits in communication lines

CAN Bus Harness
Network Wiring
Communication Circuit Wiring

20%

Connector corrosion or damage at Vehicle Dynamics Control Module

Module Connector
Connector Pins
Wiring Harness Connector

10%

Power or ground circuit failure to Vehicle Dynamics Control Module

Fuse
Power Supply Circuit
Ground Connection

5%

Gateway module failure preventing communication routing between network buses

Gateway Module
Central Gateway Controller
Network Bridge Module

Diagnostic Steps

1

Step 1: Verify power and ground to Vehicle Dynamics Control Module; check fuses and measure voltage at module connector

2

Step 2: Inspect module connector for corrosion, moisture, or physical damage; ensure proper connection and terminal integrity

3

Step 3: Use scan tool to attempt communication directly with Vehicle Dynamics Control Module to determine if module responds

4

Step 4: Monitor CAN bus signals at module connector with oscilloscope or multimeter; verify proper signal voltage levels

5

Step 5: Check CAN bus termination resistance and test for shorts to voltage or ground throughout the communication network

Estimated Repair Cost

$200 - $2,000

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0122 mean?

Communication has been lost between the vehicle's main control module and the Vehicle Dynamics Control Module. This module manages electronic stability control, traction control, and advanced handling systems.

What causes U0122?

The most common cause of U0122 (Lost Communication With Vehicle Dynamics Control Module) is: Failed Vehicle Dynamics Control Module with internal circuit or software malfunction

How much does it cost to fix U0122?

Typical repair costs for U0122 range from $200 to $2,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0122?

Electronic stability control and traction control systems will be disabled. Vehicle handling will be unpredictable in emergency situations, wet roads, or adverse conditions, significantly increasing rollover and loss-of-control risk.

How do I diagnose U0122?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0122 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Vehicle Dynamics / Stability Control System

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.