OBDHut

OBDHut

U1099

Moderate

SCP (J1850) Invalid or Missing Data for Vehicle Speed Control

What Does U1099 Mean?

Similar to U1098, this code indicates the control module is not receiving valid speed control data over the network. This is a duplicate or related speed control communication fault affecting cruise control operation.

Common Causes

35%

Failed speed control amplifier or servo not communicating on network

Speed Control Amplifier
Speed Control Servo
Cruise Control Module

25%

Open or shorted network bus wiring affecting speed control data

Network Bus Wiring
SCP Data Bus
Wiring Harness

20%

PCM internal communication circuit failure

PCM
ECM

13%

Water intrusion or corrosion in speed control module connector

Module Connector
Connector Seals
Connector Terminals

7%

Faulty vehicle speed sensor signal affecting network data

Vehicle Speed Sensor
VSS
Speed Sensor Circuit

Diagnostic Steps

1

Step 1: Verify cruise control functionality and check for related speed control codes in all modules

2

Step 2: Monitor network bus activity with bi-directional scan tool or oscilloscope for proper signal patterns

3

Step 3: Inspect speed control components for physical damage, especially wiring near the servo location

4

Step 4: Test resistance on SCP bus circuits (should be 100-120 ohms end-to-end with modules disconnected)

5

Step 5: Compare vehicle speed data across multiple modules to verify consistent speed signal throughout network

Estimated Repair Cost

$120 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1099 mean?

Similar to U1098, this code indicates the control module is not receiving valid speed control data over the network. This is a duplicate or related speed control communication fault affecting cruise control operation.

What causes U1099?

The most common cause of U1099 (SCP (J1850) Invalid or Missing Data for Vehicle Speed Control) is: Failed speed control amplifier or servo not communicating on network

How much does it cost to fix U1099?

Typical repair costs for U1099 range from $120 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1099?

Cruise control system will be inoperative. Vehicle is safe to drive but requires manual speed control by the driver.

How do I diagnose U1099?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1099 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Speed Control/Cruise Control System

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.