OBDHut

OBDHut

U1182

Moderate

SCP (J1850) Invalid or Missing Data for Primary Id

What Does U1182 Mean?

The receiving module cannot obtain valid Primary ID data from another control module via the SCP J1850 network. Primary ID typically refers to critical identification or status data needed for module-to-module coordination.

Common Causes

35%

Faulty Powertrain Control Module (PCM) or Body Control Module not broadcasting Primary ID

Powertrain Control Module
Body Control Module

30%

SCP network bus wiring fault, short, or open circuit preventing data transmission

SCP Bus Wiring
Network Connectors
Termination Resistors

20%

Failed instrument cluster or other module expecting Primary ID data

Instrument Cluster
Receiving Module

15%

Network bus overload from shorted module or excessive electrical noise

Failed Module
Shielding

Diagnostic Steps

1

Step 1: Use scan tool network monitoring function to identify which module is setting the code and which module's data is missing

2

Step 2: Check for multiple U-codes to determine if problem is with one transmitting module or entire bus failure

3

Step 3: Test SCP bus voltage levels (should be approximately 5-7V nominal with proper biasing)

4

Step 4: Inspect all connectors on suspected modules for water intrusion, corrosion, or bent pins

5

Step 5: Disconnect modules one at a time to isolate a potentially shorted module causing bus communication failure

Estimated Repair Cost

$150 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1182 mean?

The receiving module cannot obtain valid Primary ID data from another control module via the SCP J1850 network. Primary ID typically refers to critical identification or status data needed for module-to-module coordination.

What causes U1182?

The most common cause of U1182 (SCP (J1850) Invalid or Missing Data for Primary Id) is: Faulty Powertrain Control Module (PCM) or Body Control Module not broadcasting Primary ID

How much does it cost to fix U1182?

Typical repair costs for U1182 range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1182?

May cause loss of gauge cluster functions, warning lights, or coordination between powertrain and body systems. Verify all critical safety systems are operational before driving.

How do I diagnose U1182?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1182 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Vehicle Communication Network

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.